Comments on: Reef Aquarium Sump Tank Design https://gmacreef.com/reef-aquarium-sump-tank-design/ Reef Aquarium Plumbing & Design Fri, 17 Jan 2025 05:02:17 +0000 hourly 1 https://wordpress.org/?v=6.8.13 By: gmacreef https://gmacreef.com/reef-aquarium-sump-tank-design/#comment-52135 Fri, 17 Jan 2025 05:02:17 +0000 http://gmacreef.com/?p=682#comment-52135 In reply to Joe.

I will probably update the section where I initially recommended under-over-under as a baffle configuration. In practice I prefer over-under-over just because it reduces the area where surface scum can accumulate. On my 40 gallon sump I ended up adding another baffle to the skimmer section which makes it over-under-over (3 baffles) instead of just under-over with 2 baffles.
As far as your question about Chaeto, I run a decent amount of it in my return pump section separated only by a piece of egg crate that doesn’t even span the whole width of the sump. It keeps the main clump of Chaeto separated but smaller pieces float around a bit. I also use a fish net to remove most of the smaller bits of Chaeto from the sump every other month or so. My pump is a Jebao DCP-6000 and has a built-in strainer on the intake. Even with doing that, sometimes the odd couple of pieces of Cheato get into the pump and into the display. So far no issues. I find strainers easier to clean than sponges.

]]>
By: Joe https://gmacreef.com/reef-aquarium-sump-tank-design/#comment-52057 Wed, 15 Jan 2025 04:14:56 +0000 http://gmacreef.com/?p=682#comment-52057 Thank you, these write ups are fantastic. I just found your site and have gotten at ton of clarification on questions I’ve had that were left out by YouTube videos. One question, if doing a refugium in the 2nd chamber and return pump in third chamber utilizing the under-over-under design, do you recommend putting filter floss or filter sponge between the chambers to prevent bits of chaeto or other debris from reaching the return pump? If so where in the under-over-under design? And if so do you have a specific recommendation for sponge eg micron size ?

]]>
By: gmacreef https://gmacreef.com/reef-aquarium-sump-tank-design/#comment-32881 Sat, 06 Apr 2024 03:55:54 +0000 http://gmacreef.com/?p=682#comment-32881 In reply to Paula Socha.

On a small sump like a 20 gallon you may want to just have less baffles in order to save space in the tank. On my 40 gal with a 13 gal sump I just have a single baffle in the center where water flows over into the return section/chamber. As long as the flow rate is lower (like below 300 GPH) then you will have minimal microbubbles to deal with. What you described sounds it will work. One thing to avoid is creating a really small volume in the return section because then your ATO will have to turn on and off more.

]]>
By: Paula Socha https://gmacreef.com/reef-aquarium-sump-tank-design/#comment-31604 Mon, 12 Feb 2024 04:46:32 +0000 http://gmacreef.com/?p=682#comment-31604 I watched too many videos, decided on a plan and started it, found yours and incorporated some of your info into my build. I don’t know how to send you a pic but, I have 5 baffles in a 20H. The skimmer will be in the space with the intake, then 3 baffles -over/under/over at 1″ spacing,-the first over is 10″ high, under is 1″ off tank floor and third one is 7 1/2″, 10 1/4″area length including baffles; next space 6 1/2″ – maybe refuge, maybe not; last 2 baffles- over/under and will be media area at 2″ overall, 1st at 6 3/4″, 2nd at 1″ from bottom like first under; last is return pump chamber at 5 1/2″ w, height of last baffles is 11″ including 1″ space underneath.

]]>
By: gmacreef https://gmacreef.com/reef-aquarium-sump-tank-design/#comment-6057 Tue, 21 May 2019 21:57:39 +0000 http://gmacreef.com/?p=682#comment-6057 In reply to Mihai.

Thank you for your comment. I actually started writing an article about overflow surface skimming, combs and weirs. I realized it isn’t the most interesting topic. Maybe I will publish it one of these days.

]]>